« Freenas with Xen » : différence entre les versions

De TeriaHowto
Sauter à la navigation Sauter à la recherche
mAucun résumé des modifications
mAucun résumé des modifications
 
(44 versions intermédiaires par le même utilisateur non affichées)
Ligne 1 : Ligne 1 :
'''note''' : this tutorial applies to '''Freenas 9.3'''. Feenas 9.10 (based on FreeBSD 10) and upward natively includes the optimizations for Xen and LSI cards described here.
This howto is based on the excellent work made by [http://mywiredhouse.net/blog/building-freenas-xen-pvhvm-support/ My Wired House]. It aims at building [http://www.freenas.org/ FreeNAS] with Xen PVHVM support and ultimately at putting it into production with PCI passthrough.<br />
This howto is based on the excellent work made by [http://mywiredhouse.net/blog/building-freenas-xen-pvhvm-support/ My Wired House]. It aims at building [http://www.freenas.org/ FreeNAS] with Xen PVHVM support and ultimately at putting it into production with PCI passthrough.<br />


== Build environment ==
== Build environment ==


* Install a Freebsd 9.3 (in a domU for example)
* Install Freebsd 9.3 (in a domU for example)
* Make a few adjustements
* Make a few adjustements
* Build Freenas
* Build Freenas
Ligne 9 : Ligne 11 :
=== Installation of Freebsd 9.3 in a domU ===
=== Installation of Freebsd 9.3 in a domU ===


* Install your Freebsd 9.3 on a disk / volume of 100 Go (building Frenas requires space !)
* Install Freebsd 9.3 on a disk / volume of 100 Go (building Frenas requires space !)


*  Configuration file for Xl
*  Configuration file for Xl
Ligne 26 : Ligne 28 :
#
#
disk        = [
disk        = [
                   'phy:/dev/system/freebsd.reseau.ld-disk,xvda,w', 'file:/opt/ISO/FreeBSD-9.3-RELEASE-amd64-bootonly.iso,hdc:cdrom,r'
                   'phy:/dev/system/freebsd-disk,xvda,w',  
                  'file:/opt/ISO/FreeBSD-9.3-RELEASE-amd64-bootonly.iso,hdc:cdrom,r'
               ]
               ]


Ligne 53 : Ligne 56 :
stdvga=0
stdvga=0
serial='pty'
serial='pty'
usb=1
usb=0
usbdevice='tablet'
keymap='fr'
keymap='fr'
localtime=1
localtime=1
Ligne 64 : Ligne 66 :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# freebsd-update fetch
freebsd-update fetch
# freebsd-update install
freebsd-update install
# reboot
reboot
# cd /usr/src
cd /usr/src
# make buildkernel KERNCONF=XENHVM
make buildkernel KERNCONF=XENHVM
# make installkernel KERNCONF=XENHVM
make installkernel KERNCONF=XENHVM
# sed -i".backup" 's/ada/xbd/g' /etc/fstab
sed -i".backup" 's/ada/xbd/g' /etc/fstab
# sed -i".backup" 's/ifconfig_em0/ifconfig_xn0/' /etc/rc.conf
sed -i".backup" 's/ifconfig_em0/ifconfig_xn0/' /etc/rc.conf
# reboot
reboot
</syntaxhighlight>
</syntaxhighlight>


Ligne 82 : Ligne 84 :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# pkg install poudriere-devel git cdrtools pxz python grub2-pcbsd xorriso py27-sphinx py27-sphinxcontrib-httpdomain-1.2.1  
pkg install poudriere-devel git cdrtools pxz python grub2-pcbsd xorriso py27-sphinx py27-sphinxcontrib-httpdomain-1.2.1  
</syntaxhighlight>
</syntaxhighlight>


=== Dowload Freenas 9.3 release ===
=== Clone Freenas 9.3-STABLE branch ===


Dowload the last 9.3 Freenas release on [https://github.com/freenas/freenas/releases Github] (e.g. [https://github.com/freenas/freenas/archive/9.3-STABLE-201506042008.tar.gz 9.3-STABLE-201506042008.tar.gz])
Clone the Freenas 9.3-STABLE branch from [https://github.com/freenas/freenas Github]


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# mkdir -p /home && wget --no-check-certificate -O /home/9.3-STABLE-201506042008.tar.gz https://github.com/freenas/freenas/archive/9.3-STABLE-201506042008.tar.gz
mkdir /home
# cd /home
cd /home && git clone https://github.com/freenas/freenas.git
# tar xf 9.3-STABLE-201506042008.tar.gz
cd freenas && git checkout 9.3-STABLE
# mv freenas-9.3-STABLE-201506042008 freenas
make checkout
# cd freenas
# make git-external
</syntaxhighlight>
</syntaxhighlight>


=== A few adjustements on Freenas sources ===
=== A few adjustements on Freenas sources ===


* Modify "VERSION" in Makefile to reflect the custom release :
* Modify "VERSION" in ''Makefile'' to reflect the custom release :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# sed -i".backup" 's/VERSION\?=9.3-STABLE/VERSION\?=9.3-STABLE-xen/' /home/freenas/Makefile
sed -i".backup" 's/VERSION\?=9.3.1-STABLE/VERSION\?=9.3.1-STABLE-xen/ ; s/TRAIN\?=\${NANO_LABEL}-9.3-STABLE/TRAIN\?=${NANO_LABEL}-9.3-STABLE-xen/' /home/freenas/Makefile
</syntaxhighlight>
</syntaxhighlight>


* Edit /home/freenas/build/nanobsd-cfg/FREENAS.amd64 and at the end, add theses lines :
* Edit ''/home/freenas/build/nanobsd-cfg/FREENAS.amd64'' and at the end, add theses lines :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
Ligne 118 : Ligne 118 :
</syntaxhighlight>
</syntaxhighlight>


* Remove the "problematic" "set -e" in create_iso.sh (I know, this is bad but the process would stop at this stage if not ...) :
* Remove the "problematic" "set -e" in ''create_iso.sh'' (I know, this is bad but the process would stop at this stage if not ...) :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# sed -i".backup" 's/set -e/#set -e/' /home/freenas/build/create_iso.sh
sed -i".backup" 's/set -e/#set -e/' /home/freenas/build/create_iso.sh
</syntaxhighlight>
</syntaxhighlight>


Ligne 129 : Ligne 129 :


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
# make checkout
# env _KEY=set NANO_LABEL=FreeNAS VERSION=9.3-STABLE-xen \
GIT_LOCATION=EXTERNAL \
BUILD_TIMESTAMP=`date '+%Y%m%d%H%M'` \
SEQUENCE=FreeNAS-9.3-STABLE-xen-201506042008 \
TRAIN=FreeNAS-9.3-STABLE-xen \
UPDATE_USER=sef FREENAS_KEYFILE=Keys/ix-nightly-key.key \
CHANGELOG=ChangeLog \
make release
make release
</syntaxhighlight>
If all went well, you will find the result in ''/home/freenas/objs/FreeNAS-9.3-STABLE-xen-201506052152/x64'' :
<syntaxhighlight lang="bash">
ls /home/freenas/objs/FreeNAS-9.3.1-STABLE-xen-201509111019/x64
FreeNAS-9.3-STABLE-xen-201509111019.GUI_Upgrade.txz            FreeNAS-9.3-STABLE-xen-201509111019.iso
FreeNAS-9.3-STABLE-xen-201509111019.GUI_Upgrade.txz.sha256.txt  FreeNAS-9.3-STABLE-xen-201509111019.iso.sha256.txt
</syntaxhighlight>
</syntaxhighlight>


== Installation of Freenas 9.3 in a domU ==
== Installation of Freenas 9.3 in a domU ==
Installation is done through the following steps :
* boot of the installer without PCI passthrough
* first boot of the fresh Freenas installation without PCI passthrough
* in Freenas, adding the necessary options for PCI passthrgouh ... And the last reboot with PCI passthrough activated
=== Xl config file ===
<syntaxhighlight lang="python">
#
#  Kernel + memory size
#
builder      = 'hvm'
boot        = 'cd'
memory      = '8192'
vcpus        = '2'
#
#  Disk device(s).
#
disk        = [
                  'phy:/dev/system/freenas-disk,xvda,w',
                  'file:/opt/ISO/FreeNAS-9.3-STABLE-xen-201506052152.iso,hdb:cdrom,r'
              ]
#
#  Hostname
#
name        = 'freenas'
#
#  Networking
#
vif        = [ 'mac=00:16:3e:xx:xx:xx, model=e1000' ]
#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot  = 'restart'
on_crash    = 'restart'
sdl=0
vnc = 1
vncunused = 1
vnclisten = '0.0.0.0'
stdvga=0
serial='pty'
usb=0
keymap='fr'
localtime=1
</syntaxhighlight>
=== Booting the installer ===
* Start the vm
<syntaxhighlight lang="bash">
xl create /etc/xen/freenas.ld
</syntaxhighlight>
<!-- * As soon as the VM boots, open the console (e.g. via VNC), go to the Grub command prompt by pressing "c" and enter the following lines : -->
<!-- <gallery> -->
<!-- Fichier:Grub.png|Grub options to start the installer -->
<!-- </gallery> -->
* Follow the steps to install Freenas ; choose the volume named xbd0 which reflects the use of PV drivers
=== Booting your fresh Freenas installation ===
<!-- Once again, because of this [https://bugs.freenas.org/issues/7376 little issue], booting the fresh Freenas installation for the first time requires special option ''hint.hpet.0.clock=0'' -->
<!-- * As soon as the VM reboots after Freenas installation, reopen the console (e.g. via VNC), go to the Grub command prompt by pressing "c" and enter the following lines :
<!-- <syntaxhighlight lang="bash"> -->
<!-- grub> insmod zfs -->
<!-- grub> kfreebsd /ROOT/default/@/boot/kernel/kernel -->
<!-- grub> kfreebsd_loadenv /ROOT/default@/boot/device.hints -->
<!-- grub> set kFreeBSD.kernelname="/boot/kernel/kernel" -->
<!-- grub> kfreebsd_module /ROOT/default/@/boot/zfs/rpool.cache type=/boot/zfs/zpool.cache -->
<!-- grub> set kFreeBSD.vfs.root.mountfrom=zfs:freenas-boot/ROOT/default -->
<!-- grub> kfreebsd_module_elf /ROOT/default/@/boot/kernel/ispfw.ko -->
<!-- grub> set kFreeBSD.hint.hpet.0.clock=0 -->
<!-- grub> boot -->
<!-- </syntaxhighlight> -->
<!-- * In Freenas GUI, go to "System" -> "Tunales" -> "Add Tunable" : -->
<!-- ** Variable : hint.hpet.0.clock -->
<!-- ** Value : 0
<!-- ** Type : loader -->
For PCI passthrough with LSI devices such as [http://www.lsi.com/products/host-bus-adapters/pages/lsi-sas-9211-8i.aspx LSI 9211-8i] (LSI 9211 cards in IT mode are recommanded with Freenas), two more tunables are required ; in Freenas GUI, go to "System" -> "Tunables" -> "Add Tunable" :
* Variable : hw.pci.enable_msi
** Value : 1
** Type : sysctl
* Variable : hw.pci.enable_msix
** Value : 0
** Type : sysctl

Dernière version du 29 mars 2021 à 10:51

note : this tutorial applies to Freenas 9.3. Feenas 9.10 (based on FreeBSD 10) and upward natively includes the optimizations for Xen and LSI cards described here.

This howto is based on the excellent work made by My Wired House. It aims at building FreeNAS with Xen PVHVM support and ultimately at putting it into production with PCI passthrough.

Build environment

  • Install Freebsd 9.3 (in a domU for example)
  • Make a few adjustements
  • Build Freenas

Installation of Freebsd 9.3 in a domU

  • Install Freebsd 9.3 on a disk / volume of 100 Go (building Frenas requires space !)
  • Configuration file for Xl
#
#  Kernel + memory size
#
builder      = 'hvm'
boot         = 'cd'
memory       = '2048'
vcpus        = '1'

#
#  Disk device(s).
#
disk        = [
                  'phy:/dev/system/freebsd-disk,xvda,w', 
                  'file:/opt/ISO/FreeBSD-9.3-RELEASE-amd64-bootonly.iso,hdc:cdrom,r'
              ]


#
#  Hostname
#
name        = 'freebsd'

#
#  Networking
#
vif         = [ 'mac=00:16:3e:xx:xx:xx, model=e1000' ]

#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'

sdl=0
vnc = 1
vncunused = 1
vnclisten = '0.0.0.0'
stdvga=0
serial='pty'
usb=0
keymap='fr'
localtime=1
  • Note: To speed up the process, add RAM and vCPUs if you can !

Update & PVHVM configuration (to boost performances)

freebsd-update fetch
freebsd-update install
reboot
cd /usr/src
make buildkernel KERNCONF=XENHVM
make installkernel KERNCONF=XENHVM
sed -i".backup" 's/ada/xbd/g' /etc/fstab
sed -i".backup" 's/ifconfig_em0/ifconfig_xn0/' /etc/rc.conf
reboot

Building Freenas

Install Freenas dependencies

Cf Readme on Github

pkg install poudriere-devel git cdrtools pxz python grub2-pcbsd xorriso py27-sphinx py27-sphinxcontrib-httpdomain-1.2.1

Clone Freenas 9.3-STABLE branch

Clone the Freenas 9.3-STABLE branch from Github

mkdir /home
cd /home && git clone https://github.com/freenas/freenas.git
cd freenas && git checkout 9.3-STABLE
make checkout

A few adjustements on Freenas sources

  • Modify "VERSION" in Makefile to reflect the custom release :
sed -i".backup" 's/VERSION\?=9.3.1-STABLE/VERSION\?=9.3.1-STABLE-xen/ ; s/TRAIN\?=\${NANO_LABEL}-9.3-STABLE/TRAIN\?=${NANO_LABEL}-9.3-STABLE-xen/' /home/freenas/Makefile
  • Edit /home/freenas/build/nanobsd-cfg/FREENAS.amd64 and at the end, add theses lines :
options         NO_ADAPTIVE_MUTEXES
options         NO_ADAPTIVE_RWLOCKS
options         NO_ADAPTIVE_SX

# Xen HVM support
options         XENHVM
device          xenpci
  • Remove the "problematic" "set -e" in create_iso.sh (I know, this is bad but the process would stop at this stage if not ...) :
sed -i".backup" 's/set -e/#set -e/' /home/freenas/build/create_iso.sh

Build !

Depending on the ressources allocated to your Freebsd build machine, it will take a while !

make release

If all went well, you will find the result in /home/freenas/objs/FreeNAS-9.3-STABLE-xen-201506052152/x64 :

ls /home/freenas/objs/FreeNAS-9.3.1-STABLE-xen-201509111019/x64
FreeNAS-9.3-STABLE-xen-201509111019.GUI_Upgrade.txz             FreeNAS-9.3-STABLE-xen-201509111019.iso
FreeNAS-9.3-STABLE-xen-201509111019.GUI_Upgrade.txz.sha256.txt  FreeNAS-9.3-STABLE-xen-201509111019.iso.sha256.txt

Installation of Freenas 9.3 in a domU

Installation is done through the following steps :

  • boot of the installer without PCI passthrough
  • first boot of the fresh Freenas installation without PCI passthrough
  • in Freenas, adding the necessary options for PCI passthrgouh ... And the last reboot with PCI passthrough activated

Xl config file

#
#  Kernel + memory size
#
builder      = 'hvm'
boot         = 'cd'
memory       = '8192'
vcpus        = '2'

#
#  Disk device(s).
#
disk        = [
                  'phy:/dev/system/freenas-disk,xvda,w',
                  'file:/opt/ISO/FreeNAS-9.3-STABLE-xen-201506052152.iso,hdb:cdrom,r'
              ]


#
#  Hostname
#
name        = 'freenas'

#
#  Networking
#
vif         = [ 'mac=00:16:3e:xx:xx:xx, model=e1000' ]

#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'

sdl=0
vnc = 1
vncunused = 1
vnclisten = '0.0.0.0'
stdvga=0
serial='pty'
usb=0
keymap='fr'
localtime=1

Booting the installer

  • Start the vm
xl create /etc/xen/freenas.ld


  • Follow the steps to install Freenas ; choose the volume named xbd0 which reflects the use of PV drivers

Booting your fresh Freenas installation

For PCI passthrough with LSI devices such as LSI 9211-8i (LSI 9211 cards in IT mode are recommanded with Freenas), two more tunables are required ; in Freenas GUI, go to "System" -> "Tunables" -> "Add Tunable" :

  • Variable : hw.pci.enable_msi
    • Value : 1
    • Type : sysctl
  • Variable : hw.pci.enable_msix
    • Value : 0
    • Type : sysctl